How much do flexible acoustic panels typically cost per square metre in Australia? As a simple supply-only benchmark, a 2700 × 600 mm flexible slat panel priced between $199 and $289 per panel works out to approximately $123–$178 per m². Each panel covers 1.62 m² before allowing for cuts, joins, curves or waste.
This is a market comparison rather than an EMU Design price or project quote. A check on 22 September 2026 also found comparable flexible acoustic products advertised from around $189 per 2700 × 600 mm panel, which would equal roughly $117/m², so prices should always be checked again before publication or ordering.
Convert Panel Price to Cost per m²
The basic calculation is straightforward: multiply the panel length by its width to find its area, then divide the panel price by that area. For a 2700 × 600 mm panel, the calculation is 2.7 m × 0.6 m = 1.62 m².
| Calculation | Example |
|---|---|
| Panel dimensions | 2700 × 600 mm |
| Nominal panel coverage | 1.62 m² |
| Panel price example | $199 |
| $199 ÷ 1.62 | Approx. $123/m² |
| Higher panel price example | $289 |
| $289 ÷ 1.62 | Approx. $178/m² |
| What is not included | Delivery, trims, fixings, waste and installation |
This nominal coverage is useful for comparing products, but it does not automatically equal the usable coverage on your project. Edge cuts, panel alignment, openings, joins and curved surfaces can increase the number of panels required.
EMU Design’s current flexible panel listings include 2700 × 600 × 12 mm options, so the same area calculation can be used when planning quantities. Current product details and availability should still be confirmed before ordering.
After estimating the quantity, browse Flexible Acoustic Panels to compare available finishes and confirm the product details that apply to your project.
Compare Like With Like Before Using a m² Price
A low price per square metre does not necessarily mean two products are equivalent. Flexible wall products can differ significantly in dimensions, slat construction, finish, backing material and overall thickness. Compare the actual product specification before using a competitor price as a budget guide.
Check the panel dimensions, slat profile, timber or decorative finish, backing material, thickness and intended flat or curved application. You should also confirm whether trims or fixings are required, whether GST is included, delivery charges to your location, and whether the selected finish is currently in stock.
It is also important to separate flexible timber-look acoustic slat panels from products that serve a different purpose. Polyester acoustic panels, decorative flexible sheets, rigid plywood products and sound-isolation barriers may all appear in similar searches, but their construction and intended performance can be very different.
For that reason, the most useful price comparison is between products with similar dimensions, construction and intended use rather than simply choosing the lowest advertised $/m² figure.
Why Curved Features Can Cost More
Flexible panels can make it easier to create feature walls around columns, corners and curved surfaces, but a curved installation can require more planning than a simple flat wall. The nominal wall area alone may not tell you how many full panels will actually be needed.
Columns, doors, windows, power points and other openings can change the cutting pattern. Maintaining consistent slat alignment around a curve may also create offcuts that cannot be reused elsewhere. Depending on the layout, extra material may be needed to keep joins and edges looking intentional.
The substrate and site conditions matter as well. An uneven surface, difficult access or a complex transition between curved and flat sections may increase preparation and installation work. Flexible does not mean that every panel will suit every radius, surface or installation method, so suitability should be confirmed for the selected product before ordering.
Labour should also be treated separately from the panel supply price. A figure such as $123–$178/m² describes the panel cost benchmark only. It does not tell you the installed project cost.
For standard rigid slat panels or broader commercial installation budgeting, see How Much Do Acoustic Slat Panels Cost per Square Metre in Australia?
What Else Should Be Included in Your Budget?
The panel price is usually only one part of the total project cost. Depending on the design and installation scope, you may also need to allow for delivery, trims, compatible fixings or adhesive, cutting, substrate preparation and additional material for waste.
Location can also affect the final figure. A panel price advertised online may not include freight to your suburb or site, particularly when full-height panels are being transported. Always check what is included before comparing two quotes.
If installation is required, the quote should clearly separate supply from labour where possible. This makes it much easier to compare options and understand whether differences are coming from the panels themselves, delivery, preparation or the complexity of the installation.
Get a Project-Ready Estimate
For a more useful estimate, start with the actual project rather than a generic square-metre figure. Measure the overall height and width of each area and identify columns, corners, openings or other details that could affect the layout.
For curved applications, include clear photos of the surface and enough measurements to explain the shape. Do not assume that a flexible panel can follow any radius simply because it bends.
When requesting a quote, provide:
- wall height and width;
- photos of the wall, column or curved surface;
- preferred finish;
- project suburb or postcode;
- information about site access;
- doors, windows, power points or other openings;
- whether you need supply only or also want to discuss installation.
This information gives EMU Design a much clearer basis for confirming product suitability, quantities and current pricing. Product details, availability, fixing requirements and other project-specific information should always be confirmed before ordering.
For current information, contact EMU Design with your measurements, photos, preferred finish and project location.
FAQs
How do you calculate the cost per m² of flexible acoustic panels?
Multiply the panel length by its width in metres to calculate the panel area. Then divide the panel price by that area. A 2700 × 600 mm panel covers 1.62 m², so a $199 panel works out to approximately $123/m² before delivery, accessories, waste or installation.
Are flexible acoustic panels more expensive than standard slat panels?
They can be, but there is no universal price difference. Construction, backing, thickness, finish, dimensions and supplier pricing can all affect the result. Compare products with similar specifications instead of assuming that a flexible panel will always cost more than a rigid alternative.
Does a curved wall require more panel material?
Sometimes. The measured surface area may be similar, but curved layouts can create more cuts, offcuts and alignment requirements. Columns, openings and transitions between curved and flat sections can also affect how efficiently each panel is used.
Do flexible acoustic panels soundproof a room?
Acoustic treatment and soundproofing are different. Acoustic panels are generally used to manage sound within a space, such as reducing reflections and echo, while soundproofing is concerned with limiting sound transmission between spaces. Do not assume that a decorative acoustic panel will provide a particular sound-isolation result unless that performance is specifically documented.
What is needed for an accurate flexible-panel quote?
Provide the wall dimensions, photos of the surface, details of any curve, your preferred finish, project location and access information. You should also explain whether you need supply only or want installation included in the project scope.
How Much Should You Budget?
For an initial supply comparison, a 2700 × 600 mm flexible panel priced at $199–$289 works out to approximately $123–$178/m². That figure is useful for comparing panel supply, but it should not be treated as the complete project price.
Actual material quantities can change once cuts, openings, curves, joins and waste are considered, while delivery, accessories and installation may add further costs. If you are asking how much do flexible acoustic panels typically cost per square metre in Australia, use the m² figure as a starting benchmark and then request a project-specific quote.
Send EMU Design your measurements, photos of the curve or wall, preferred finish, project location and supply-only or installation requirements to confirm the most appropriate product and current project pricing.