Smoked Oak 24S Acoustic Slat Panels

Smoked Oak 24S acoustic slat panels give a wall a darker, smoked timber-look finish and a clean vertical rhythm. Each panel is 600 mm wide and 19 mm thick, comes in a 2400 mm or 2700 mm length, and has a felt backing behind the slats that helps soften echo in rooms full of hard surfaces. EMU Design is based in Rouse Hill, so if you are looking for smoked oak acoustic slat panels in Sydney, you can order online, ask us for photos, or see the range in person.

• Darker smoked oak timber-look finish, made for one strong feature wall
• 600 mm wide and 19 mm thick, in 2400 mm ($66.00) or 2700 mm ($70.00) lengths
• Felt-backed slats that soften echo inside the room
• For indoor use only
• Sydney-wide delivery available, quoted by suburb
• Rouse Hill showroom for seeing colours and finishes (contact us first)

Check lengths and price

What Smoked Oak 24S Acoustic Slat Panels Bring to a Room

The slats catch the light along their edges while the gaps between them fall into shadow, which is what gives a flat plasterboard wall real depth. In a smoked oak finish that depth comes with a darker, more grounded tone than natural or white oak, without the starkness of a black wall.

Dark timber-look finishes sit naturally beside timber furniture, stone benchtops and matte black fittings, so Smoked Oak 24S suits a single feature wall far better than a room wrapped in panels on every side.

Screens flatter and flatten colour, so judge this finish in the room itself. Hold a sample up beside your floor and cabinetry in morning light and again after dark. If you cannot get to Rouse Hill, ask us for photos or a short video of Smoked Oak 24S. Ring or email before you drive over, and we will make sure it is out for you to see.

Smoked Oak B618 is a separate smoked oak product in our range, at 18 mm thick and sold in one length. Its colour is not guaranteed to match 24S, so keep the two on separate walls.

Smoked Oak 24S Lengths, Price and Wall Cost

There are two lengths, both 600 mm wide and 19 mm thick. Prices are per panel and delivery is quoted separately.

Per square metre, the 2700 mm panel is about $2.62 cheaper, and it covers a 2.7 m wall in one piece with no horizontal join. On a 2.4 m wall, though, the 2400 mm length needs little or no trimming, while a 2700 mm panel would have 300 mm cut off the end that you have still paid for. Many Australian homes have 2400 mm or 2700 mm ceilings, so measure your actual wall height before choosing.

To price a wall, divide its width by 0.6 m, round up to whole panels, then multiply by the panel price. A 1.2 m wide, 2.4 m high alcove takes two 2400 mm panels ($132.00). A 4.5 m wide, 2.7 m high wall comes to 7.5, so eight 2700 mm panels ($560.00), with the last one ripped down to fit. Keep one extra panel in the order for corners and power points. Our guide on how to measure a wall for acoustic panels covers doors, switches and awkward edges, and the cost per square metre guide helps you budget fixings and labour as well.

If a length shows as sold out, use the Notify Me button on this page or contact us to ask about timing.

Where Smoked Oak 24S Works Well

• Entry or hallway: a run of slats on the wall you see first, or at the end of a corridor
• Dining wall: behind a table or banquette, where hard surfaces can make conversation sound sharp
• Open-plan apartment: one feature wall that takes the edge off bounce from hard floors and glass
• Boutique, clinic or small reception: a warm backdrop behind a counter or waiting area

Smoked Oak 24S is for indoor use only. Keep it out of bathrooms, wet or damp areas and outdoor spots. For exterior cladding, look at our outdoor WPC panels, or browse the full acoustic slat panels range to compare other finishes for indoor walls.

What the Slats Do for Sound

The felt backing behind the slats absorbs part of the sound that would otherwise bounce straight back off a hard wall. In the room where the panels are fitted, that can mean less echo and speech that is easier to follow.

Before You Buy: Returns and the Fine Print

Panels cannot be returned for a change of mind once they have been cut or fitted, so it pays to know the rules before you order. Here is the short version of our returns and exchanges policy.

If you change your mind

• Eligible change-of-mind returns and exchanges are accepted within 15 calendar days of purchase or delivery
• Panels must be unused, uninstalled and in their original condition, and you need proof of purchase
• The original plastic wrapping, protective film, packaging and labels must be intact
• You pay the transport, delivery or collection costs of returning the panels, and the original delivery charge is generally not refundable for a change-of-mind return
• EMU Design can refuse a return that does not meet these conditions

What cannot be returned for a change of mind

• Panels that have been cut to size, drilled, modified or marked
• Panels that have been installed or partly installed
• Panels damaged after collection or delivery
• Panels returned without their original protective packaging, where that affects their condition

If a panel is faulty, damaged or not what you ordered

Contact us as soon as reasonably possible with your proof of purchase, photos or videos of the panel and details of the issue. We will assess it and provide an appropriate remedy under the Australian Consumer Law. Nothing in our returns policy limits your rights under the Australian Consumer Law. For any return or exchange enquiry, include your invoice or order number and the products concerned through our contact page.

Smoked Oak Acoustic Slat Panels in Sydney: Delivery, Pickup and Showroom

Sydney-wide delivery is available. Delivery cost depends on your location, order size and product length. Contact us with your suburb and order details for a delivery quote.

Shipping times vary by location and product availability, and tracking is provided once your order is dispatched. If an order arrives damaged, contact customer support as soon as possible.

You are welcome to see our products, colours and finishes at the Rouse Hill showroom: Unit S25, The Vaul, 5 Money Close, Rouse Hill NSW 2155. We are open Monday to Friday 9am to 5pm and Saturday 9am to 4pm, and closed on Sunday. Please contact us first on +61 452 166 781 or at info@emudesignbuild.com.au so we can confirm Smoked Oak 24S is available to view.

Buying for a job? Trade buyers, builders and installers can send us the product and quantity for a quote.

Fitting Smoked Oak 24S

Panels go onto a clean, sound wall with adhesive or screws. If you have basic tools and some experience, a plain feature wall is a realistic weekend job. Large areas, ceilings, tall walls and fiddly cut-outs call for an experienced installer. We work with installers we can recommend, so send photos and measurements of the space and we can help line one up. Tell us the wall material and we can point you to a suitable adhesive and the accessories you will need.

Before you pick up a saw, read how to cut acoustic slat panels (remember that cut panels cannot be returned for a change of mind). For the fixing itself, see how to install acoustic slat wall panels and the best adhesive for acoustic slat wall panels.

Smoked Oak 24S Acoustic Slat Panels FAQs

Pairs Well With

Ready to Order Smoked Oak 24S?

Choose your length above and add it to your cart, or send us your suburb, wall width and wall height and we will check the quantity and quote delivery. Contact EMU Design, call +61 452 166 781 or email info@emudesignbuild.com.au.