Smoked Oak B618

Smoked Oak B618 Acoustic Slat Panels

Want a darker timber-look feature wall without going all the way to black? Smoked Oak B618 acoustic slat panels are worth considering for a TV backdrop, a wall behind the bed or a home office. The smoked oak finish adds contrast to light interiors, while the slatted design breaks up a large, plain wall.

Start with the colour of your flooring and cabinetry. A darker wall can look balanced beside pale paint and light furnishings, but feel much heavier in a room with little daylight. Compare the finish in natural and evening light before committing to a full wall.

Still deciding on the colour? Browse our acoustic slat wall panels to compare smoked oak with lighter oak, walnut, grey and black options.

Product Details and Finish Comparison

Comparing similar names? Smoked Oak (24S) is a separate product with different listed size options. Do not assume it matches B618 in colour, thickness or construction. Ask to compare the two finishes before mixing them on the same wall.

A Feature Wall, Not a Soundproofing System

Acoustic slat panels are generally used to manage reflected sound inside a room. This is different from stopping traffic noise or sound travelling through a shared wall.

If your room feels echoey, discuss its size, hard surfaces and proposed panel coverage with EMU Design. The result depends on the panel construction, how much surface is covered and the installation method. If your project needs a particular acoustic rating, ask for B618-specific test information before ordering rather than relying on a rating for another panel.

Plan the Wall Before Ordering

1. Measure the full area. Record the wall width and height, including any section above doors or beside cabinetry.
2. Mark the interruptions. Note power points, switches, skirting boards, corners and TV brackets. Plan cable access before covering the wall.
3. Confirm the panel dimensions and usable coverage. Send your measurements to EMU Design so we can help estimate the quantity and allow for cutting and wastage.
4. Choose the fixing method for your wall. Confirm the B618 installation requirements, substrate and suitable accessories before buying screws or adhesive.

For a TV wall, fix the bracket to a suitable structural support, not just the decorative panels. For ceilings, high walls or complicated cut-outs, ask about an experienced installer rather than treating the job as a standard DIY wall installation.

Smoked Oak B618 FAQs

How can I check the colour before ordering online?

We can send photos or videos of available colours to help you choose. Ask for the Smoked Oak B618 finish so you can compare it with your flooring, cabinetry and furniture. If you prefer to view samples in person, our Rouse Hill showroom has available finishes to compare; contact us before visiting to confirm the product is on display.

Do you deliver acoustic slat panels across Sydney?

Yes. Sydney-wide delivery is available. The delivery cost depends on your location, order size and product length. Send us your suburb and order details for a delivery quote.

How many panels should I order?

Send us the width and height of your wall or ceiling, and we can help calculate the approximate number of panels required. Include a photo showing corners, openings and fixtures. Allow a small amount for cutting and wastage rather than ordering only for the exact wall area.

Can I install the panels myself, or can you arrange an installer?

Many of our products are suitable for DIY installation if you have basic tools and installation experience. Check the installation requirements for B618 and your wall surface before starting. For larger areas, high walls, ceilings or complicated finishes, we recommend an experienced installer. We work with professional installers we can recommend and can help coordinate installation when you send photos and measurements.

Do you supply adhesive and installation accessories?

Yes. Suitable adhesive and selected installation accessories are available for many of our panel products. Let us know you are installing Smoked Oak B618 and describe the wall surface so we can advise which accessories you may need.

Will acoustic slat panels soundproof my room?

No. Acoustic slat panels are used to help reduce echo and manage reflected sound within a room. Stopping sound from passing between rooms usually requires insulation, sealed gaps and changes to the wall or ceiling construction.

Are these panels suitable for outdoor areas?

Our standard acoustic panels are designed primarily for indoor use. For exterior walls, alfresco areas and other outdoor applications, we recommend our outdoor WPC panel range instead.

Do you offer trade or bulk pricing?

Yes. As a direct supplier, EMU Design offers competitive pricing, including better rates for builders, installers, trade customers and larger-volume orders. Send us the product name and quantity required for a quote.

Get Your B618 Price and Sydney Delivery Quote

Ready to narrow it down? Contact EMU Design for a Smoked Oak B618 quote with your wall width and height, a photo of the space and your Sydney suburb. Let us know whether you need supply only or help arranging installation.

We can help check the panel quantity, current pricing, availability and delivery cost before you place your order.