Walnut 292C Acoustic Slat Panels

Walnut 292C acoustic slat panels bring a deep, warm walnut tone to a feature wall, with evenly spaced slats that add shadow lines and texture. Each panel is 2900 mm long, 600 mm wide and 19 mm thick, which is longer than the 2400 mm and 2700 mm lengths listed across EMU's acoustic slat panels range, so taller walls need fewer joins.

The slats sit on a felt backing that helps soften echo in rooms with hard floors and flat walls, so the wall looks finished and the room sounds a little less sharp. EMU Design supplies Walnut 292C acoustic slat panels in Sydney from Rouse Hill, with Sydney-wide delivery available.

Why choose Walnut 292C

Walnut is the finish to pick when you want a wall to feel settled rather than bright. It pairs naturally with timber floors, cream and white walls, dark joinery and soft furnishings, and it gives a TV wall, bedhead wall or reception backdrop a clear focal point without any extra decoration.

Want something lighter? Compare the oak acoustic slat panels. Need a shorter length? Walnut MJYK6311 comes in 2700 mm, and the Premium MDF acoustic slat wall panels cover black, grey and teak.

Walnut 292C Acoustic Slat Panels: size and coverage

To estimate how many panels you need, divide your wall width by 600 mm. A 3 m wide wall needs about five panels before cutting and wastage. Send EMU your wall width and height and they can help calculate the number of panels, and it is sensible to allow a little extra for cuts. If you have not measured yet, start with How to Measure a Wall for Acoustic Panels.

What you get with Walnut 292C

• Warm walnut finish in a long 2900 × 600 × 19 mm panel
• MDF slats with a wood-look finish for a clean, linear feature wall
• Felt backing that helps reduce echo inside the room
• Fixes to a sound wall with adhesive or screws
• Suits homes, offices, retail and hospitality interiors
• Indoor use only

Where Walnut 292C works best

• Tall living-room and TV walls: the 2900 mm length suits walls where a shorter panel would leave a gap above it. Measure your wall height first so you know whether you need a full-length run or a cut-down panel.
• Bedhead walls and home offices: behind a bed or desk, the felt backing takes some of the sharpness out of a bare, flat wall.
• Offices, reception areas, retail and hospitality: EMU supplies commercial projects across Australia. For a larger commercial wall, ask EMU for product documents for the exact panel before you specify it.

Before you order: returns, exchanges and colour checks

Walnut 292C is a long panel, and a few minutes of checking before you buy can save you a lot of hassle. This is what EMU's Returns & Exchanges Policy asks you to know first.

• 15-day change-of-mind window: EMU accepts eligible change-of-mind returns or exchanges within 15 calendar days of purchase or delivery, with proof of purchase.
• The panel must be untouched: unused, uninstalled and in its original condition, with the original wrapping, protective film, packaging and labels still in place. It must not be cut, drilled, modified, marked or damaged.
• Cut or installed panels cannot be returned for change of mind. Confirm the colour, size, quantity and finish before you cut or fix anything.
• Return costs: for an approved change-of-mind return or exchange, you cover the transport or collection costs, and original delivery charges are generally not refundable.
• Colour can vary: slight differences in colour, grain, pattern or finish can occur between batches, samples, photos and the actual panel, so check the walnut tone in your room before installing.
• Inspect on arrival: check the product type, colour and finish, dimensions, quantity and condition before installation or cutting. If something is wrong, contact EMU before you proceed.
• Faulty, damaged or incorrect panels: contact EMU as soon as reasonably possible with your proof of purchase, photos or videos and details of the issue. EMU will assess it and provide a remedy in line with the Australian Consumer Law, which this policy does not limit.

Fitting and cutting Walnut 292C

On a straightforward, sound wall, Walnut 292C can be fixed with adhesive or screws, so many walls suit a confident DIY install. For larger areas, high walls, ceilings or more complicated surfaces, use an experienced installer. EMU works with installers it can recommend, so send photos and measurements of your wall and they can help coordinate the job.

A 2900 mm panel is long, so plan how you will carry it into the room before delivery day. If you need to trim it to your ceiling height, plan your cuts first and remember the cut-panel rule above. These guides cover each step:

• How to Cut Acoustic Slat Panels
• How to Install Acoustic Slat Wall Panels
• What Is the Best Adhesive for Acoustic Slat Wall Panels?
• How Much Do Acoustic Slat Panels Cost per Square Metre in Australia?

EMU also supplies suitable adhesive and selected installation accessories for many of its panels. Tell them you are installing Walnut 292C and they can advise what you will need.

Walnut 292C Acoustic Slat Panels in Sydney: delivery and showroom

Sydney-wide delivery is available. Delivery cost depends on your location, order size and product length. Contact us with your suburb and order details for a delivery quote. Because length affects the cost, mention that you are ordering the 2900 mm Walnut 292C when you ask.

EMU Design is a Sydney-based supplier at Unit S25, The Vaul, 5 Money Close, Rouse Hill NSW 2155. Call +61 452 166 781 or send your wall size through the contact page and EMU will confirm availability, quantities and delivery for your suburb.

Walnut 292C Acoustic Slat Panels FAQs

Keep exploring