Walnut (KY382-04-126S) Flexible Acoustic Slat Panels

Walnut KY382-04-126S flexible acoustic slat panels give a feature wall the depth of a dark timber slat pattern without the limits of a rigid board. The flexible backing lets the panel follow many curved surfaces, and the slatted face helps take the edge off echo in rooms with hard floors, glass and plasterboard.

Each panel measures 2700 × 600 × 12 mm and is priced at $85.00. EMU Design is a Sydney-based supplier, so you can ask for help with measurements, see the finishes at the Rouse Hill showroom and request a delivery quote before you order.

Ask about this panel

A deep walnut tone for rooms that need warmth

Walnut is the darker, richer end of EMU Design’s flexible range, which also includes Light Oak and Smoked Oak. It suits larger feature walls and rooms with darker joinery, timber furniture or warm lighting, where a pale finish could feel out of place.

Because the panel is flexible, the same finish can carry on from a flat wall into a column, counter or gentle curve, so the feature reads as one continuous piece instead of a flat wall with a separate curved detail.

Key features

• Walnut finish, product code KY382-04-126S
• Flexible backing designed to follow many curved surfaces as well as flat walls
• Acoustic slat format to help reduce echo and reverberation inside the room
• One size: 2700 × 600 × 12 mm
• $85.00 per panel, about $52.47 per m² before wastage, fixings and delivery
• Made for interior feature walls and projects
• Sits in the same flexible range as Light Oak and Smoked Oak, so finishes can be matched or contrasted

Size and price

To estimate how many panels you need, divide the wall width by 0.6 m and round up. A 3 m wide wall needs five panels across. If the slats run vertically, a wall up to 2.7 m high can use a single panel from top to bottom, while taller walls need a join. Allow a small amount for cuts and wastage, then send EMU Design your measurements so the count can be checked.

Where walnut flexible slat panels work best

• TV and media walls, where a darker slatted backdrop frames the screen and softens echo from hard floors
• Bedroom feature walls behind the bed, where walnut adds warmth and texture
• Home offices and meeting rooms, where a bare flat wall can make calls and conversation sound sharp
• Reception counters, columns and gentle curves, where a rigid panel is difficult to fit
• Retail and hospitality interiors. EMU Design supplies residential, commercial, retail and hospitality projects across Australia, so ask for product documents if you are specifying a larger commercial wall

Walnut flexible acoustic slat panels in Australia

EMU Design is a Sydney-based supplier of premium interior wall solutions, serving residential, commercial, retail and hospitality projects across Australia. Browse the full flexible acoustic panels range to compare finishes, or start with the walnut panel on this page if your room calls for a deeper timber tone.

Before you order

Acoustic panels are not soundproofing

These panels help manage sound inside the room they are installed in, particularly echo created by hard surfaces. They will not stop voices, music or machinery passing through a wall. If noise from next door is the problem, the wall may also need insulation and sealed gaps.

Check the bend before committing to a tight curve

Flexible does not mean the panel will follow every radius. If you plan to wrap a column or a tight curve, send EMU Design the approximate radius and a few photos so suitability can be confirmed for this panel before you order.

Keep it to dry interior rooms

Do not assume this panel suits bathrooms, steam, splash zones or outdoor areas. For outdoor cladding, see the Outdoor WPC Panels range.

Compare the finish in your own room

Walnut can look different on a screen than it does beside your flooring and cabinetry. Visit the showroom to see available samples and finishes, or ask EMU Design to send photos or videos of the colours currently available.

Installation planning

Measure the wall at several points, especially where it curves. Mark power points, switches, doors and skirting boards, and plan where the first and last panels will sit so you do not end up with a very narrow strip at the visible edge.

Confirm the recommended fixing method and cutting tools for this panel before you start, rather than relying on instructions written for another brand or for a rigid slat panel. Suitable adhesive and selected installation accessories are available for many EMU panel products, so tell us what you are installing and we can advise what you may need. Any cut-outs around power points must be completed by a licensed electrician.

Simple walls can suit a DIY install if you have basic tools and some experience. For large areas, high walls, ceilings, curves or complicated finishes, an experienced installer is the safer choice. EMU Design works with installers it can recommend, so send photos and measurements of the area to get started. For help planning the layout, read How to Measure a Wall for Acoustic Panels.

Delivery, showroom and returns

Sydney-wide delivery is available. Delivery cost depends on your location, order size and product length. Contact us with your suburb and order details for a delivery quote.

Shipping times vary by location and product availability, and tracking information is provided once your order has been dispatched. If your order arrives damaged or faulty, contact customer support as soon as possible.

You are welcome to visit the Rouse Hill showroom (Unit S25, The Vaul, 5 Money Close, Rouse Hill NSW 2155) to see products, colours and finishes in person. Please contact us first so we can confirm the products you want to see are available to view.

Change-of-mind returns are accepted within 15 calendar days, provided the product is unused, uninstalled, uncut, undrilled and in its original packaging. You pay return transport and collection, and original delivery charges are generally not refundable for change-of-mind returns. If an item is defective, contact EMU Design with proof of purchase and photos. Full details are in the Returns & Exchanges Policy.

Call +61 452 166 781 or email info@emudesignbuild.com.au. Hours are Monday to Friday 9am–5pm and Saturday 9am–4pm.

Walnut KY382-04-126S FAQs

Pairs well with

Send us your measurements